The history of hand turning bowls dates to 700 B.C. or before. The art of making wooden bowls continued through the centuries and remains practiced today. When you take up the art of wood turning, you need to gather wood carving tools for bowls. Fortunately, these are available at woodworking shops and hardware stores. Other People Are ReadingHow to Carve Wood BowlsHow to Select Wood Carving ToolsPrint this article Chain SawThe first tool in the process of making a bowl is the chain saw.
With a chain saw, you cut a trunk of a tree into the size you need. Try to make the cuts on the top and bottom even and level. Once you cut the log to the size you need, use the chain saw again to cut the log in half lengthwise. Other uses of a chain saw include making cuts from the outside of the log to create the diameter of the bowl and cutting down to the approximate depth of the bowl.Thumbtack, String and PencilThe thumbtack, string and the pencil are the next wood-carving tool for bowls. With these simple tools, you can determine the diameter of the bowl. After you set your halved log down, rounded side to the ground, tie one end of the string to the thumbtack and the other to the pencil. Decide how wide you want the bowl. Wind the sting around the pencil until it’s the half the length of the desired diameter. Push the thumbtack into the flat surface of the log. With the string taut, draw the pencil around in a circle.Flat AdzeAn adze is a tool for smoothing wood. It has a head that more resembles a hoe than an axe, for the blade of the adze is not perpendicular. Use the adze to carve away the extra wood until you are left with the rough shape of the wood. Use the adze to cut out the interior of the bowl. Try to cut with the grain as much as you can as you do so, turning the bowl as you cut
Article Source:http://www.woodcarvingcrafts.com/WoodCarving/994.html
With a chain saw, you cut a trunk of a tree into the size you need. Try to make the cuts on the top and bottom even and level. Once you cut the log to the size you need, use the chain saw again to cut the log in half lengthwise. Other uses of a chain saw include making cuts from the outside of the log to create the diameter of the bowl and cutting down to the approximate depth of the bowl.Thumbtack, String and PencilThe thumbtack, string and the pencil are the next wood-carving tool for bowls. With these simple tools, you can determine the diameter of the bowl. After you set your halved log down, rounded side to the ground, tie one end of the string to the thumbtack and the other to the pencil. Decide how wide you want the bowl. Wind the sting around the pencil until it’s the half the length of the desired diameter. Push the thumbtack into the flat surface of the log. With the string taut, draw the pencil around in a circle.Flat AdzeAn adze is a tool for smoothing wood. It has a head that more resembles a hoe than an axe, for the blade of the adze is not perpendicular. Use the adze to carve away the extra wood until you are left with the rough shape of the wood. Use the adze to cut out the interior of the bowl. Try to cut with the grain as much as you can as you do so, turning the bowl as you cut
Article Source:http://www.woodcarvingcrafts.com/WoodCarving/994.html
No comments:
Post a Comment